Why put lime into a pond

However, rapid changes in pH can kill fish, even within this range.

liquid lime for ponds

In general, deficient ponds will need at least 1 ton per acre but sometimes more. In ponds already filled with water, limestone should be applied evenly across the water surface.

Spreading Adding lime in the fall or winter allows hardness to reach the proper levels before spring fertilization.

What kind of lime for ponds

Treating a new pond 5. In a limed pond, the fertilizer element phosphorus is in the soluble, orthophosphate form that is available to plankton; otherwise, it will be mostly tied up in bottom sediments. Applications are best done well before the warmer months, which is the growing season for warm-water fish. Place the broken pieces on top of the log pile to a depth of 50 to 90 cm. In larger ponds, where several tons may be required, a platform can be built on the front of a large boat or between two boats tied together. Other Methods If you can drive around the pond, another option is to get a special lime spreader to distribute the lime. Liming increases dissolved minerals in the water, which reduces stress on fish over the winter. A method frequently used with good results is to apply the amount of lime recommended by a soil test, then apply one-fourth of that amount each succeeding year to keep lime requirements satisfied. Test results can take two forms: how much lime is required to raise the pH to 7 or neutral , or what the pH will be if you add one, two, or three tons of lime. Adding Lime The best way to add lime to your pond is to scatter it evenly over the bottom.

Be sure that it always remains below 9. Algae The over or undergrowth of algae in a pond may indicate the need for lime.

Cleaning pond water with lime

Lime diluted in water can be applied using a large wooden spoon. Quicklime or hydrated lime is spread on the wet pond bottom, and fertilizers are applied in spring only. Check with your state game and fish department or local farmers' co-op for leads. In small ponds this can be done directly from the banks, but if the pond is large it may be necessary to use a boat or a floating platform. The appropriate level is between 40 and ppm. In practical terms, pH is a measure of acidity. Why Lime? In technical terms, pH is defined as the negative log of the molar concentration of hydronium ions. Let it cool for at least 24 hours.

If it is exposed to water and air it returns to CaC03 6. Liming increases dissolved minerals in the water, which reduces stress on fish over the winter.

Rated 9/10 based on 1 review
Download
When to Lime a Fish Pond